Supply spare parts and performing all rehabilitation, major overhaul and commissioning of 8 x GE-Frame 5 gas turbine units in South Baghdad power station including all units' auxiliaries and refurbishment of some Hot Gas Path components and reused again. The HFO base load energy on ISO conditions was successfully achieved.

Design and manufacturing of two Air Intake systems with pulse jet; design and supply equipment and installation of new 132kV feeder; complete rehabilitation with supplying of damaged parts; renovation of all electrical and Instruments and control systems for two GE-F5 gas turbine units in Shuiaba gas power station and related auxiliaries.

Supply of all necessary parts, engineering work and performing major overhaul on turbo-compressor, generator, related auxiliaries and renovation of all electrical, instrument and control systems for GE-Frame 6 gas turbine unit in Nassiriyah gas power station. The base load energy on ISO conditions was successfully achieved.

Complete engineering work, supply of necessary parts, rehabilitation and operation of GE-Frame 6 gas turbine unit in Samawa gas power plant along with the renovation of all electrical and instrument systems according to technical specification and project policies. The base load energy on ISO conditions was successfully achieved.

Preparation of drawings by survey and reverse-engineering at site and supplying all raw materials and manufacturing of Economizer Coils & Headers, furnace Baffle Wall tubes & panels and Rear Wall panels for the boilers (980 ton/hr) of 4 x 320 MW units in Al-Mussaib T.P.P and training for pipe welding and fitting.

Engineering work, supply of all necessary parts and materials and major overhaul of Al-Mussaib 320 MW unit including steam turbine (HP, IP and LP rotors), generator, auxiliaries, MESVs, Governors and ICV, oil systems, adjusting foundations and bearing levels and renovation of electrical and Instrument systems.

Technical report on the state of the 4 x 320 MW units of Al-Mussaib steam power plant and assessment of defects and problems along with providing solutions and maintenance strategies for all units including steam turbine, generator, auxiliaries, thermal cycle, boiler, electrical system, control system and etc.

Disassembly, major overhaul and replacement of Hot Gas Path components with refurbished components for two GE-frame 9 gas turbine units including compressor, turbine and generator. Renovation of all electrical and control systems detecting, removing oil leakages and performing oil test for 160 MVA main Transformer.

Supply of consumable materials and rejuvenation and refurbishment of Hot Gas Path components including two sets of combustion Cap and Liners of GE-Frame 9 in Al-Heidariyah gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supply of consumable materials and rejuvenation and refurbishment of Hot Gas Path components including two sets of combustion transition pieces of GE-Frame 9 in Al-Khairat gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supply of all consumable materials and rejuvenation and refurbishment of Hot Gas Path components including two sets of combustion Cap and Liners of GE-Frame 9 in Hilla gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supply of consumable materials and rejuvenation and refurbishment of hot gas path components including of two sets of combustion transition pieces of GE-F9 in Al-Heidariyah gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supply of consumable materials and rejuvenation and refurbishment of Hot Gas Path components including of two sets of combustion Cap and Liners of GE-Frame 9 in Al-Khairat gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supply of all consumable materials and rejuvenation and refurbishment of Hot Gas Path components including two sets of combustion Cap and Liners of GE-Frame 9 in Karbala gas power station by repairing them according to the relevant standards and technical specifications and returned them to the client for future use.

Supervisory services for minor inspection of two V94.2 gas units in Al-Sadir gas power plant, including: Air intake, Lower parts, IGV inspection and check the position, Compressor blades - stage 1, Combustion chamber - left and right, Turbine Blades - stages 1 & 2 and Exhaust casing

Supply of consumable materials and rehabilitation of Hot Gas Path components including GE-Nuovo Pignone, 1st and 2nd stage Nozzles Six complete sets for GE-frame 5 gas turbines in South Baghdad II gas power plant according to the relevant standards and technical specifications. 

Supply of consumable materials and rehabilitation for Hot Gas Path components in workshop including 1st and 2nd stage Nozzles (X 2), Transition Pieces (X2), 1st and 2nd stage Shrouds (x2) and 1st stage Bucket for Hitachi H25 gas turbines in Al-Taji gas power plant according to the relevant standards and technical specifications.

Supply of consumable materials and rehabilitation for three sets Hot Gas Path components in workshop including Cap & Liner, Transition Piece and Flow Sleeve for GE-Frame 9 gas turbine in Al-Quds gas power plant in a short time and according to the relevant standards and technical specifications and returned them to the client.

Supply of consumable materials and rehabilitation for Hot Gas Path components in workshop including 1st, 2nd and 3rd stages Nozzles, 1st, 2nd and 3rd stages Buckets and Pin Dowels for Ge-Frame 9 gas turbines in South Baghdad I gas power plant according to the relevant standards and technical specifications.

Dispatching required manpower for performing overhaul including disassembly and assembly of the LP turbine in unit no.2 of 4x320 MW Al-Mussaib Steam power plant, considering dispatching turbine specialist and performing according to the relevant standards and technical specifications

Dispatching required manpower for performing overhaul of turbine oil pumps, repair of bearings and alignment it in unit no.2 of 4x320 MW Al-Mussaib steam power plant, considering dispatching specialist 8000 hours guarantee period of the job Performing the work in a short time

Dispatching required manpower for performing overhaul including disassembly and assembly of the HP and IP turbine Main Steam Valves and Governors in unit no.2 of 4x320 MW Al-Mussaib steam power plant, considering dispatching specialist and performing according to the relevant standards and technical specifications

Delivery of parts from power plant and performing rehabilitation and test of Fire Resistance Fluid (FRF) pump in workshop and delivery it to the site for 4x320 MW Al-Mussaib steam power plant, considering performing according to the relevant standards and technical specifications 8000 hours guarantee period of the job

Supply of consumable materials and rehabilitation of six sets of rotor and stator blades of V94.2 gas turbines in Al-Sadir gas power plant according to the relevant standards and technical specifications and returned the parts to the power plant, considering 8000 hours guarantee period of the job Performing the work in a short time

Delivery of parts from power plant and performing refurbishment and test of Generator journal bearings in workshop and delivery it to the site for GE-Frame 9 South Baghdad I gas power station, considering 8000 hours guarantee period of the job; Performing the work in a short time.

Supply of consumable materials and rehabilitation for three sets Hot Gas Path components in workshop including Cap & Liner (X2), Transition Pieces (X2) and Flow Sleeve (X2), 8 sets of 1st & 2nd & 3rd stages Nozzles and Buckets for GE-Frame 9 gas turbine in Al-Quds gas power plant in a short time and according to the relevant standards and technical specifications.

Supply of consumable materials and rehabilitation for Hot Gas Path components in workshop including:

1st Stage Nozzle (X2), 2nd Stage Nozzle (X2), 3rd Stage Nozzle (X2), 1st Stage Bucket (X2) and 2nd Stage Bucket (X1) for GE-Frame 9 gas turbines in South Baghdad I gas power plant according to the relevant standards.

 8000 hours guarantee period of the job.

Supply of consumable materials, rejuvenation and rehabilitation for three sets Buckets & Nozzles of GE-Frame 9 gas turbine in Al-Quds gas power plant. Including delivery of parts from the warehouse, repair in a short time and according to the relevant technical specifications and returned the parts to the power plant.

Rehabilitation of one 5 MVA Transformer for Najaf new gas power plant, considering:

  Supply of consumable materials and repair the Transformer according to the relevant technical specifications and  standards.

8000 hours guarantee Performing the work in a short time

Delivery of parts from power plant and performing rehabilitation and test of two Turbine and Generator Journal Bearings in workshop and delivery it to the site  for GE-Frame 9 gas turbine in Al-Quds gas power station according to the relevant standards and technical specifications and 8000 hours guarantee period of the job.

Supply of consumable materials, rehabilitation of four Generator for GE-F9 gas units in Al-Quds gas power station. Including dismantling, cleaning of Stator and Rotor, performing insulation of phases at the end side, repair of the defective Bars, repair or changing of Bar insulators, welding of Stator bars, painting of Stator & Rotor insulation,  executing all necessary electrical tests and assembly.

Supply of consumables and rehabilitation of Hot Gas Path components in workshop including:1st Stage Nozzle (X3), 2nd Stage Nozzle (X3), 3rd Stage Nozzle (X3), 1st Stage Bucket (X3), 2nd Stage Bucket (X3), 3rd Stage Bucket (X3), Flow Sleeve (X3), Transition Piece (X3), Cap & Liner (X3) for GE-Frame 9 gas turbines in Al-Quds gas power plant according to the relevant technical specifications. 

Delivery of parts from power plant and performing refurbishment and test of Turbine and Generator journal bearings in workshop and delivery it to the site for V94.2 Al-Sadr gas power station, considering performing according to the relevant standards and technical specifications  and 8000 hours guarantee period of the job

1st, 2nd and 3rd Stages Blades and Vanes, A-B Shield Heat Segments, Dual Fuel Lances, Liner, Front Segments, Burner, cylindrical sleeve and Journal and Thrust bearings for BBC 13D gas turbines in Najaf gas power plant.